1. Customization: The buyer of Stone Garden Statues and the manufacturer determine the size of the stone sculpture, the raw materials used, the appearance, and the details in the early stage, and sign a contract.
2. Cutting materials. The commonly used tool is electric scissors, which can cut thin plates below 2 mm, but the level after cutting is not good. There is also a cutting machine that can cut thick plates and thin plates, but it can only cut one fiberglass
stone carving strip. Straight lines are powerless when encountering arcs. If you want to cut Stone Garden Statues in a flat and multi-shaped way, you can use plasma to cut them.
Third, forging, the Stone Garden Statues is brought into the mold and struck firmly, the material is lowered according to the different shapes of each part of the model, and consciously struck according to its rugged changes, the stone carving manufacturer bends, and the edge is struck, and you can strike any Tangible, solid objects, and then take the knocked Stone Garden Statues to the mold, and compare it with the mold, and think that its shape is correct and fully able to be close to the model, and then these scattered carbon steel plates, stone The garden statue is welded from top to bottom. Each piece of stone sculpture is connected to the mold and adjusted so that the appearance and texture effect of each piece of stone sculpture should be the same. This requires forging it together to form the shape. You can also cut it before cutting. When forging these points, use a round-headed hammer head to make the forgings even and regularly arranged in a row, with wide and narrow distances, and the size of the spiritual fortress of the force should be the same.
The production of Stone Garden Statues adopts the forging method. Before production, the Stone Garden Statues manufacturers will decompose the whole Stone Garden Statues into multiple units according to the shape and characteristics of the stone sculpture and from the perspective of ease of molding. According to this The method is to shape unit products, then combine them into a whole, and process the whole.
