1. Cutting materials. Generally speaking, the commonly used tool for making Stone Garden Statues is electric scissors, which can cut thin plates within 2mm, but the neatness after cutting is not good. There are also plate cutting machines and thick plate machines. All thin plates can be cut, but they can only cut straight lines. If you hit an arc, there's not much you can do. If you want to cut the Stone Garden Statues neatly and diversely, you must use a plasma cutter. Plasma cutting machines can cut with high plasma. Metal cannot be cut using ordinary oxygen cutting methods. Because electric current and steam enter a special nozzle with cooling water, causing strong contraction and generating a higher temperature plasma flow, the cut Stone Garden Statues materials are neat and not deformed. Please note that when cutting the material, the hand must be steady, otherwise the material will be cut. After the material is cut, it should be planed according to the type specified for the work. Don't leave imperfections on the surface to avoid regrets after polishing.
2. Make carbon steel plate
stone sculpture, a method of Stone Garden Statues stone sculpture, the Stone Garden Statues is not struck on the grinding tool, but is consciously struck according to the different shapes of each part of the plaster model and its fluctuations. The curved area and edge area can be hammered in all tangible and solid objects, and the hammered Stone Garden Statues can be ground with tools, which can be covered with models, and then this dispersed carbon steel plate, Stone Garden Statues is welded from top to bottom, The abrasive should be adjusted for each piece, and the texture effect on the surface of each Stone Garden Statues should remain the same, which needs to be forged at the same time. You can also forge a bit before opening the material. When forging points, the round mouth of the hammer should be evenly and regularly arranged in a row, with the same width and spacing, and the same size. Do not knock randomly, otherwise the layering of the
stone carving will be damaged.
3. After the basic shape of the Stone Garden Statues is properly calcined, it should be welded together according to the regulations of the work. When using electric welding, you should prepare the welding machine, welding handle, welding wire and other tools. Since the light and electric sparks during the welding process are high and have a strong irritating effect on the eyes, a protective shield should be worn to prevent the eyes from being damaged by the strong light and the face from being burned by electric sparks. Due to the large degree of thermal deformation of welded Stone Garden Statues, some countermeasures should be taken, such as welding first or cooling at the same time. TIG welding is better than electric welding. It is a gas maintenance arc welding method. TIG welding is used to maintain the arc molten metal at joints to prevent the harmful effects of oxygen and nitrogen in the air. According to the different commonly used battery materials, TIG welding can be divided into fusion TIG welding and non-melting TIG welding or tungsten TIG welding. In the welding of Stone Garden Statues, ordinary tungsten argon arc welding can obtain high-quality welding quality. The advantage of this method is that it is not easy to transfer heat and the deformation of the Stone Garden Statues is smaller.
4. When polishing carbon steel plates and stone sculpture, first use a grinding wheel to weld and remove excess areas, and then use a soft wheel to polish. The polished work should be coated with polishing paste to improve the lubrication effect, make the polished work brighter, and then give people a better visual aesthetic.
5. Larger and simpler stone sculpture can also be made without welding. According to the proportion of the steel skeleton, you can use an electric drill to drill holes at the designed position immediately according to the content of the steel skeleton, and the Stone Garden Statues is fixed on the frame with bolts.
