Marble Sculpting are becoming more and more popular in this era, especially some of the more distinctive cartoon Marble Sculpting are loved by many young people and children.
Take this opportunity to take a look at the
Marble Sculpting Process and some knowledge about the Marble Sculpting and replicating process. I sincerely hope to help friends in need.
1. Marble Sculpting process
①Design and molding
Samples are produced according to the
stone carving design style provided by the customer or the style designed by the stone carving production company according to the customer's requirements. Sometimes the Marble Sculpting needs to be coated with a gel coat surface afterwards. Because the gel coat has self-leveling properties, at the same time, the surface tension increases during curing. Under the action of the gel coat layer, there is a certain leveling effect. In this case, it is not suitable for expressing delicate textures. These should be considered during design. The original mold of Marble Sculpting can be shaped with mud, and ordinary molds are completed by professionals. After the stone carving work is completed, after natural drying and reaching a certain strength, the Marble Sculpting mold can be manufactured.
②Model reproduction
Generally, gypsum is used as the mold. If two pieces are needed under special circumstances, silicone molds can be used. Silicone abrasives can produce dozens of products. Model making ensures that the stone carver is experienced, so that the product will have greater integrity.
③Product production
First, clean and wax the plaster mold. Generally, a combination of diesel and floor wax is used, so that the molded product is better, cleaner, and easy to clean. The general principle of Marble Sculpting for the first time is not to be too thick, a little thinner, and a little thinner. It is advisable to wait for about 20 minutes to dry, then thicken the Marble Sculpting a little more and do the second brushing. When the second time is about to be fixed, you can apply the stone carving fiber, then put the steel pipe to fix the back, and use the stone carving fiber to fix the fulcrum.
④Coloring treatment
Copper color treatment is used, and some use baking paint, gold paint, and gold foil. It all makes sense. Remember the repulsion between the alkyd paint and the nitrocellulose paint. Acrylic is widely used. The color should not be too thick, otherwise it will easily layer.
⑤Installation
The installation is still a bit high. Normal installation uses expansion screws. The user drills holes with an electric hammer, chisels the expansion bolts in, and fixes a few more points to ensure a solid installation.
2. Marble Sculpting and replicating process procedures
① First apply a thin layer of unsaturated polyester resin on the back of the plaster mold;
②Lay two layers of stone carving cloth pre-woven from stone carving fibers;
③Finally, apply a layer of unsaturated polyester resin to combine the stone carving cloth with the unsaturated polyester resin.
