1.
stone mountain carving shape
In terms of modeling design, if the complexity is too high and there are too many details, it will affect the preservation time of the later stone mountain carving. Secondly, some small manufacturers are not rigorous in modeling and set out by hand. They do not use computer lofting or 3D modeling for stone carving. Instead, they find a team of cheap temporary workers. Due to insufficient understanding of stone carving and insufficient digestion of customer and product requirements, the lack of thoroughness leads to The proportions are out of proportion, and the shape and drawings are greatly inconsistent, resulting in the production of substandard stone carving products.
2. Mold making
The traditional industry practice is to separate parts into molds in order to achieve quick results. There is no standard method for product molding, and the molds are separated at will. This causes the stone mountain carving to destroy details during the molding process. The finished product is obviously different from the stone carving draft, which in turn affects the quality of the stone carving. The service life of stone mountain carving.
3. Selection of raw material resin
Generally, cheap
stone sculpture are made using cheap materials and labor through contracting. As a result, the bonding between the stone sculpture and the resin is not strong enough, resulting in many bubbles, cracks, and brittleness in the product, which shortens its service life.
4. Internal structure of stone mountain carving
The traditional production method of stone mountain carving is not specialized enough in the internal structure or support of the product. Therefore, many times when the stone mountain carving are in use, the stone mountain carving will be damaged due to falling, bumping, and slipping, which in turn affects the service life of the stone mountain carving.
5. stone mountain carving
After the stone carving products are finished, they need to be ground, polished, and painted. This is because the surface dirt or yellow wax treatment of the embryo body is not thorough enough, which causes the putty and stone carving products to delaminate, crack, and fall off in the later stage; the surface repair is not meticulous enough. Not enough time was spent, the surface was uneven, there were sand holes, and even the dead corners were not repaired, which greatly reduced the quality of the product. Most factories use furniture paint, and the indoor paint and outdoor paint are falsely claimed to be automotive paint. They cannot stand the test of time: the color fades, the white turns yellow, the paint cracks, and the skin peels. A series of problems are exposed, and then during the use of stone mountain carving, problems appear. Damage affects its service life.
6. Daily maintenance
Insufficient maintenance, for example, placing the stone carving directly in the sun; not doing regular cleaning work, allowing moisture to enter the stone carving, destroying its internal structure, etc., thus affecting the service life of the stone carving.
