If there are no special requirements for the stone mountain carving thickness, it is generally 1.5mm, 2.0mm, or 3.0mm. The thicker the board, the harder it is to shape and the price is higher.
It is generally welded and relatively strong, that is, the skeleton of the
stone sculpture itself is welded to the embedded iron on the base, and the steel bars are welded under the embedded iron. The length of the steel bar and the size of the embedded iron are determined according to the size of the stone sculpture. For the sake of beauty, usually, after the stone sculpture is installed, a marble or granite plate will be pasted on the base.
stone mountain carving have a variety of shapes, including geometric stone sculpture, round carvings, abstractions, etc. They are rich in content and highly malleable.
1. Surface treatment: The color of the stone mountain carving itself is silvery white and shiny. The stone sculpture can also be painted in different colors according to requirements, usually car paint.
2. Usage: This product is suitable for outdoor and indoor places such as parks, botanical gardens, gardens, residential areas, squares, shopping malls, hotels, guesthouses, and halls.
3. Advantages of
stone carving material: not easy to rust, easy to clean, strong in wind resistance, durable, and become the mainstream of modern urban stone carving.
stone mountain carving should be cleaned regularly and placed in a dry environment to protect them. It is best to wear gloves when holding it by hand to prevent salt corrosion in the sweat on your hands. If the dirt on the stone carving is too heavy, use a cold air blow dryer to blow it off first. Then clean with a straw brush and finish with a soft brush. Never use metal polish, water, or any other solvent. This will cause the copperware to fade. We can wet the cotton ball with saliva and then wipe the cracks along the cracks from beginning to end to avoid missing them. Once a year, give the copperware a thin layer of microcrystalline wax, which is the colorless wax.
