Stone Garden Statuess have the advantages of bright color, smooth lines, beautiful appearance, and convenient installation. A simple thing, the following Stone Garden Statues manufacturers will introduce you to several steps in the process of making Stone Garden Statuess:
Design and molding: Excellent sculpture works need to have a good design foundation, and the design of Stone Garden Statuess should take into account the characteristics of their materials and craftsmanship.
stone carving technology is easy to form beautiful streamlined products, which can highlight the modern and period sense of the work, and arc and streamlined shapes can be given priority in design. In addition, because stone carving has the advantages of light weight and high strength, it can create works with strong dynamics and small supporting area. Sometimes the surface of the Stone Garden Statues needs to be coated with gel coat. Because the gel coat has self-leveling properties, and the gel coat layer has a certain leveling effect under the action of surface tension during curing, it is not suitable for expressing fine textures in this situation. These should be given consideration in design.
The original mold of the Stone Garden Statues can be molded with mud, and the ordinary mold is completed by professionals. After the sculpture work is completed, it will go through natural drying and have a certain strength, then the sculpture mold can be finished.
Manufacture of stone carvings: Stone Garden Statuess are made by hand lay-up. Before manufacturing, according to the shape characteristics of the sculpture, from the perspective of ease of forming and demoulding, the mold can be combined into several units for remanufacturing. According to this, the unit products are formed, and then they are combined into a whole. Finally, the finished product is processed and painted as a whole, and a stone garden sculpture is completed.
Mold manufacturing: Mold manufacturing is the key to
stone sculpture molding. Gypsum is often used in the manufacture of Stone Garden Statues molds. There is a better way to make molds for Stone Garden Statuess, which is to use silicone rubber and stone carving materials to make molds. The specific mold manufacturing method is: apply the prepared silicone rubber on the original mold several times, and the silicone rubber layer should be more than 1mm behind. After the silicone rubber is cross-linked, a stone carving layer with a thickness of about 3 mm is formed on the silicone rubber. After the stone carving is solidified, cut the whole mold along the divided unit blocks, and pay attention to cutting the stone carving layer and the silicone rubber layer at the same time when cutting. The connecting ribs are made between the unit blocks, and positioning grooves should be set at the connecting ribs, so that the unit block molds can be combined into a whole through the connecting ribs. After the above work is completed, the stone carving unit block is demoulded, and then the silicon rubber layer is taken off, and the removed silicon rubber block is immediately put back into the stone carving unit mold. Dedusting of the original mold→silicone rubber preparation→silicon rubber layer manufacturing→stone carving layer manufacturing→mold segmentation→joining rib manufacturing→demoulding and assembling the mold.
