When setting the width of the joint, first cut off the stone carving and the basement stone at the expansion joint, and then reserve the corresponding width according to the construction drawing, and set watchposts at both ends of the expansion joint. Washing the landscape boulders before installation can not only remove the dirt on the surface of the landscape boulders, but also keep the surface of the landscape boulders moist during the construction process and improve the quality of stone sculpture. When the stone carving components are installed, if the pillars or fences do not follow the line, use a crowbar to hold them in place.
When installing, the tenon on the bottom of the column must be aligned with the tenon on the basement stone. The corrugated corners of stone carving components should be wrapped to avoid damage caused by bumps. During the installation process, you should always pay attention to the sanitation of the surface of the landscape boulders to prevent chemicals such as paint and mortar from contaminating the stone carving railings. After the installation is completed, the surface of the landscape boulders should also be kept moist, and the maintenance of the landscape boulders should not be less than 3 days.
Before installation, the dirt, rust and other impurities on the surface should be removed to keep the surface of the stone carving clean. Before the protective construction, the floating ash, cement slag, glue, wax and other attachments on the surface of the railing should be removed. If the dirt has penetrated into the interior of the white marble railing, special cleaning agents and protective agents for stone carving can be used for cleaning. The stone sculpture must be completely dry during construction, and the water content should not exceed the relevant national standards.
If there are missing corners, chipped edges, cracks, voids, etc., they should be treated and repaired first, and the construction can only be carried out after meeting the construction requirements. It is necessary to prevent cracks and damages on the stone railings, so as not to affect the quality of the project. If cracks or damage are found, repair them in time. During construction, proper maintenance should be done on the non-protective surface of the landscape boulders to avoid pollution. It is necessary to conduct experiments in the protection of possible contact objects. If it has an impact on other materials, corresponding protection work should also be done.
landscape boulders are often presented in different appearances in life, and have very common uses and connotations. The wooden fence is replaced by stone railings. The stone railings have beautiful, stylish, environmentally friendly, anti-aging, and deformation properties, and can be widely used in municipal, water, park, and traffic bridge guardrail projects. Various stone materials for stone railings, stone materials can be consumed, wired carved railings, embossed railings, geometric railings, flat stone carving railings.
