There should be an appropriate ratio between the Stone Garden Decor and the size and scale of the space. It is necessary to consider the relationship between the positioning, color and background of the stone carving itself, so that the Stone Garden Decor and the garden environment complement each other. However, in the process of making and installing Stone Garden Decor, a key step is required-polishing.
The so-called polishing refers to the use of polishing tools, abrasive grains or other polishing media to modify the surface of the stone carving, and use mechanical and chemical effects to reduce the roughness of the workpiece surface to obtain a smooth surface. Only after the Stone Garden Decor has been polished can it enter the next step of processing. If the Stone Garden Decor cannot be polished well, it will affect the beauty of the whole Stone Garden Decor.
1. There are several steps in Stone Garden Decor polishing
After grinding, the Stone Garden Decor will enter the polishing process. According to the polishing effect, the mechanical polishing process can be divided into coarse grinding, medium grinding and fine grinding.
Fine grinding: fine polishing process to achieve the desired brightness, more commonly used soft cloth wheel or cotton wheel.
Medium grinding: On the basis of coarse grinding, further polishing is used to remove rough wear marks on the stone carving surface and rough grinding. Through this process, the surface of the workpiece is gradually smooth and bright.
Coarse grinding: mainly use sand abrasives to grind the rough surface of the workpiece to remove macroscopically uneven surfaces.
2. What are the commonly used keywords in the Stone Garden Decor and polishing process?
Abrasives: Particles that act as a leveler during wax polishing.
Grease: stearic acid, fatty acid, paraffin, etc., play a lubricating and cooling role in polishing wax.
Cutting force: the ability of the polishing wax to be polished and smoothed by the polished workpiece.
3. How to choose a polishing wheel
The power of the motor determines the size of the polishing wheel, and the shaft of the motor needs to match the polishing wheel. Place the buffing wheel in the middle of the shaft and tighten it with a wrench. Only when the surface speed of the polishing wheel is uniform can a better polishing effect be obtained. Therefore, if a too large polishing wheel is equipped with a smaller motor, the linear speed of polishing will be greatly reduced and the polishing effect will be affected.
4. How to clean the polishing residue
If you want to remove the polishing wax on the surface of the workpiece after polishing the Stone Garden Decor, you can use a degreasing and waxing liquid. This product has the characteristics of low concentration, fast dewaxing speed, low cost, high rate, and product neutrality. It will not cause damage to Stone Garden Decor. The higher the temperature and the higher the concentration, the better the cleaning ability.
