1.
Stone Garden Statues shape
In terms of modeling design, if the complexity is too high and there are too many details, it will affect the preservation time of the later Stone Garden Statues. Secondly, some small manufacturers are not rigorous in modeling and set out by hand. They do not use computer lofting or 3D modeling for stone carving. Instead, they find a team of cheap temporary workers. Due to insufficient understanding of stone carving and insufficient digestion of customer and product requirements, the lack of thoroughness leads to The proportions are out of proportion, and the shape and drawings are greatly inconsistent, resulting in the production of substandard stone carving products.
2. Mold making
The traditional industry practice is to separate parts into molds in order to achieve quick results. There is no standard method for product molding, and molds are separated at will. As a result, the details of the Stone Garden Statues are destroyed during the molding process. The finished product is obviously different from the stone carving draft, which further affects the To the service life of the Stone Garden Statues.
3. Selection of raw material resin
Generally, cheap Stone Garden Statues are made using cheap materials and labor through contracting. As a result, the bonding between fiberglass and resin is not strong enough, resulting in products with many bubbles, cracks, brittleness, and shortened service life.
4. The internal structure of the Stone Garden Statues
The traditional production method of Stone Garden Statues is not professional enough in the internal structure or support of the product. Therefore, many times when the Stone Garden Statues are in use, the Stone Garden Statues will be damaged due to falling, bumping, and slipping, which will further affect the Stone Garden Statues. service life.
5. Stone Garden Statues
After the stone garden sculptures are finished, they need to be ground, polished, and painted. This is because the surface dirt or yellow wax treatment of the embryo body is not thorough enough, which leads to the delamination, cracking, and peeling of the putty and
stone sculpture products in the later stage; the surface repair is not meticulous enough. , not enough time was spent, the surface was uneven, there were sand holes, and even the dead corners were not repaired, resulting in a greatly reduced product quality. Most factories use furniture paint, and the indoor and outdoor paints are falsely claimed to be car paints. They cannot stand the test of time: the color fades, the white turns yellow, the paint cracks, and the skin peels. A series of problems are exposed, and then during the use of the Stone Garden Statues, Damage occurs, affecting its service life.
6. Daily maintenance
Insufficient maintenance, for example, placing the Stone Garden Statues directly in the sun; not doing regular cleaning work, allowing moisture to enter the Stone Garden Statues, damaging its internal structure, etc., thus affecting the service life of the Stone Garden Statues.
