With the progress of our country's society, the strengthening of science and technology, and the development of our country's stone sculpture smelting technology, our society's demand for Stone Garden Statues is also getting higher and higher. Many people's interests are focused on the professional processing and production of Stone Garden Statues, but lack of relevant knowledge brings irreversible harm to themselves and their families. So, let`s take a look at the installation and construction precautions for Stone Garden Statues.
First of all, before the Stone Garden Statues, the Stone Garden Statues needs general
stone carving shaping. In other words, after purifying the stone sculpture melt, use a fixed mold to cool and shape the stone sculpture. In actual operation, the mold may cool and shape various stone sculpture in different ways, which requires the mold to be cleaned in time after use to prevent the next use.
1. Stone Garden Statues Stone carving is a safe and environmentally friendly wall decoration material. It has multiple functions and is widely used in many fields. Installation instructions are as follows:
①Substrate wall: The Stone Garden Statues laminated structure ensures that the insulation decorative board itself is firm and flat. Therefore, the bottom layer should be coated with standard cement mortar, which will not crack, peel, or sand, and the wall will be hollow or peeling, and the surface will be smooth. The facade of the building is vertical and the exterior corners are vertical. The slight unevenness and surface roughness of the base wall can be adjusted with special mortar.
②In order to achieve the required bonding strength, it can be directly attached to the wall like special mortar for lightweight boards.
③ Use sounding: Use sounding material to tie the veneer layer tightly, and the furniture board is close to the wall. In multi-story buildings in city squares, it is safer to use duplex building fixation methods.
④Seam solution: The seams between furniture panels must be 5mm-10mm wide. After the cement mortar at the bottom of the finished slab has dried, the joints are filled with foamed styrene and all joints are covered with a weather-resistant sealant silicone material.
The installation of Stone Garden Statues is generally divided into four links: basic wall surface, pasting, steel anchoring, and joint processing. Furniture panels must be installed according to the above process, and key points must be addressed during the entire installation process to prevent other common faults.
2. Precautions for construction of Stone Garden Statues
① Prevent luggage damage caused by carrying passengers or placing items on luggage.
②When packing luggage or going out, do not put the surface on the road immediately.
③When cement mortar adheres to the goods during construction, it should be removed immediately.
④If the surface of the product is damaged, please use genuine repair paint to repair it.
5. When the goods are damaged by sharp objects, please repair them according to the needs of the aluminum bars used in the market.
6. To avoid damage to the coating, please do not come into contact with powder, flame, etc. When cutting off the product surface.
In fact, Stone Garden Statues have few regulations on other furniture panels during storage and transportation, making their purchase increasingly convenient. In addition to this, Stone Garden Statues are adaptable to houses of various structures. Compared with other furniture panels, it greatly reduces the difficulty of project construction, improves the work efficiency of employees, further shortens the construction period, and saves many buyers' labor costs.
