The decoration of Landscape Stone not only requires carving skills, but more importantly, the choice of stone sculpture, followed by serious maintenance and maintenance. Guanyinshan stone is different from marble. The texture of marble is directional, a bit like wood. Guanyinshan stone and Qingdou stone are a bit like concrete. If there is relevant technology, some materials containing ionic surfactants can also be used to clean up some common pollution on stone sculpture.
When cleaning, avoid using some corrosive cleaners to clean the Landscape Stone, so as not to damage the surface of the
stone carving. Therefore, stone sculpture should not be blown directly to the air outlet of the air conditioner, nor should they be placed near the heating pipe. For normal cleaning, do not wipe with a towel soaked in water, but with a waxy or oily cotton towel. Landscape Stone should be stored in a sheltered place and placed in a vacuum glass window for easy appreciation and maintenance.
Therefore, it is necessary to protect the stone sculpture before construction. my country's current maintenance products are still in the early stages of development, and their technical performance is uneven. Care must be taken when selecting them. Regarding the protective agent, regardless of "green, red and white", it is unscientific to use a large amount, and it can be polished with a soft cloth. For some stone sculpture that have been collected for a long time and have been "faded", they can be washed with warm water, dried in the shade, heated with a hair dryer, waxed and sealed, and polished to make the work look brand new.
The key to preventing rust spots is to carry out surface treatment after stone carving processing to prevent the oxidized iron-containing minerals from leaking out of the surface. Generally, oil-based protective agents are used. Landscape Stone should be protected from sunlight, wind, and dust. Too much dust will destroy the natural charm of the work, so it is best to put them in a glass cabinet for easy viewing and preservation.
The sealing wax method can be used for maintenance, that is, after heating the printing stone and printing engravings, apply a thin layer of wax and polish with a soft cloth. For some stone sculpture that have been collected for a long time and have been "faded", they can be washed with warm water, dried in the shade, heated with a hair dryer, waxed and sealed, and polished to make the work look brand new. Landscape Stone should avoid corrosive liquids and violent collisions.
The cleaning of Landscape Stone is mainly to remove dust. Dust can be swept away with a broom and then wiped with a rag. If the surface of the stone carving machine is stained with dirt, you can use a spatula to gently peel off the dirt; if you have relevant technology, you can also use some materials containing ionic surfactants to remove some common pollution on the stone carving. When cleaning, avoid using some corrosive cleaners, so as not to damage the surface of the Landscape Stone.
