How to repair damage to Landscape Stone?

Anyone who knows something about stone carving will know that Landscape Stone is light in weight, corrosion-resistant, and has good designability. It can flexibly design various complex shapes as needed to meet usage requirements and make the product have good integrity.

In addition, the Landscape Stone technology is simple, can be formed at one time, and has outstanding economic effects. Especially for products with complex shapes and a small number of products that are difficult to form, its technical advantages are even more prominent. Also, it's easy to color. Compared with copper sculptures and stone sculpture, Landscape Stone products have different shapes and colorful colors, and they also have the characteristics of relatively low cost.

Where there are advantages there will be disadvantages. Aging is an obvious defect of Landscape Stone. Therefore, Landscape Stone are prone to performance degradation under the action of ultraviolet rays, wind, sand, rain, snow, chemical media, mechanical external forces, etc. Poor long-term temperature resistance is another disadvantage.

Due to the influence of high temperature and severe cold, long-term thermal expansion and contraction will also produce fine cracks on the surface. Although it will not affect the overall appearance, it will reduce the aesthetics. In the later use and maintenance, due to improper exercise and maintenance, skin paint may peel off, etc. So how to repair damage to Landscape Stone.

It is very important to clean the crack surface first. If you don't clean it up, the rest of the work will be in vain. For Landscape Stone with relatively large cracks, first repair the keel, then apply Landscape Stone glue on the stone carving cloth and paste it on the keel in proportion. After curing, the surface should be evenly coated with the same glue mix. After curing, the surface should be restored by polishing and then repaired with paint of the same color.

One thing to note when repairing small cracks is that after cleaning the surface, use a tool to enlarge the small cracks so that we can smoothly fill the raw materials. After curing, sand and polish, and then repair with paint of the same color. Among them, when doing paint repair, you need to spray it repeatedly two or three times, and repair the details when doing primer to check whether the product repair is in place.