In spring, there is more rain, water vapor in the air, and high humidity. At this time, you must be careful of Marble Sculptings. We spend a lot of money to buy Marble Sculpting handicrafts. If we don`t maintain them carefully, once there are mold spots, yellowing, water spots and other problems in the rainy season, then the editor of this issue will talk to you about the moisture-proof Marble Sculptings.
1. Prevention of Marble Sculpting
There will be many pore structures on the surface of Marble Sculptings, including micro-crack structures that cannot be distinguished visually, various capillary pores, micropores, pores, etc. all over the Marble Sculptings. And the small pores on these marble sculptures are like the pores on our skin, accumulating to absorb the floating dust and particles in the air. Once it comes to the rainy season, the result can be imagined, the marble sculpture absorbs excessive water vapor in an instant, and a little carelessness may cause the marble sculpture to become mildewed.
Therefore, keeping the Marble Sculpting surface clean should be the first priority. After all, the effect of prevention in advance is definitely better than the effect of treatment after the occurrence, so in the prevention stage, the most direct and effective method is to let the marble sculpture be ventilated frequently.
It is difficult for normal marble sculptures to breed mold in a dry environment. Clean frequently, wipe and remove dust frequently, and do a good job of cleaning, and the chance of mold breeding on the surface of marble sculptures will be reduced. Another thing to pay attention to is not to accumulate sundries near the marble sculpture for a long time. The accumulation of sundries will easily cause various pollution
2. Stain cleaning
If unfortunately the marble sculpture has grown mildew, don't worry at this time, the editor will teach you the "sticking method" to deal with mildew pollution. There are five steps in total:
① Clean up the pollutants on the surface of the Marble Sculpting first. We can use a dry cloth or a soft brush to clean the pollutants on the surface of the Marble Sculpting.
② After diluting with a special Marble Sculpting cleaner, spray it on the contaminated Marble Sculpting part. One thing to note here is that marble cleaners and granite cleaners should be distinguished and cannot be used universally, otherwise it is easy to cause irreversible damage to Marble Sculptings.
③Paste the clean non-woven fabric on the polluted surface of the Marble Sculpting to avoid the loss of potion. You can also put a layer of plastic film on the top and let it stand for two or three hours.
④Peel off the film, at this time we should be able to see significant effects. Then rinse the Marble Sculpting surface with clean water, and then dry it with a dry cloth.
⑤ If there are still pollutants on the Marble Sculpting surface after the above steps, we can repeat the third and fourth steps to clean the Marble Sculpting several times until it is clean.
