1. Environmental hygiene: The construction site should be cleaned every day. Dispose of waste epoxy resin properly; flying dust and debris from the production process sticking to wet epoxy resin will affect product quality.
2. Placement: The placement of
Landscape Stone works is very important, because cast copper
stone sculpture are afraid of being exposed to the sun, so they cannot be placed in areas with strong light sources, otherwise they may cause cracking over time. But be careful not to put it in a humid environment. Some epoxy resins may grow mold due to the material.
3. Abrasive tool cleaning: The surface of the abrasive tool must be cleaned before use, and washed multiple times with cleaning fluid and cold water (toluene and other cleaning agents are not suitable for epoxy resin). For Landscape Stone to be anti-corrosion to a mirror effect, all floating dust, particles and oil stains on the surface of the mold must be removed.
4. Daily cleaning: Everyone usually cleans all objects with clean water, but due to the particularity of the resin material, it cannot be cleaned with a wet rag, because the water that penetrates into the epoxy resin will damage the epoxy resin. Therefore, it is recommended to use a damp cotton cloth or duster to wipe off the dust on the cast copper stone sculpture. Cut off floating dust, particles and oil stains, keeping it clean and transparent anytime and anywhere.
5. Cleaning of special tools: Production equipment should be cleaned by full-time personnel to facilitate actual operation and avoid endangering the anti-corrosion quality of Landscape Stone due to epoxy resin agglomeration, particulate matter, dust and other reasons.
6. Regular maintenance: If the cast copper stone sculpture has been left for a long time, the gloss will not be as bright as before. At this time, you can use a rag to wipe the surface of the cast copper stone sculpture artwork, and use a wet cotton cloth to wipe and polish it.
