Cleaning is an important preparation for stone animal carvings. stone carving products are to a large extent a craft that requires stone carving. The beauty and quality of the product are closely related to the cleaning work.
1. Mold cleaning: The surface of the mold must be cleaned before use, and washed repeatedly with detergent and water (do not use acetone and other detergents that dissolve resin). In order for the stone carving to achieve a mirror effect, all dust, particles and oil on the surface of the mold should be removed.
2. Environmental cleaning: Clean the construction site every day. Waste resin and products should be disposed of in time. Wet resin should be attached with dust and production residues, which will affect product quality.
3. Cleaning of
Landscape Stone tools: Production tools are cleaned by dedicated personnel, which not only facilitates operation, but also avoids the problem of one factor. During the stone carving production process, there are resin agglomerates, easily falling off particles and mud chips on the tools, which will affect the quality of the stone carving.
4. Provide cleaning tools for the batching machine and paste making machine, and record the use and damage of the tools.
5. After removing the residual resin on the tools, place the tools in a closed container and soak them in acetone (except
Stone Carving Tools) for later use.
6. Tools delivered for use should be dry.
7. The towels and wool pads used for waxing Landscape Stone should be washed with hot oil, soap or detergent, and used after the water is clean and dry. Detergent can also be replaced with a hot soda and water solution. Change the habit of using expensive and dangerous acetone as a cleaning agent.
8. Clean the special container for gel coat after every use. Crusts and particles are not allowed, and to facilitate cleaning, the inner walls of the appliance must not be coated with wax.
