1. Stone Garden Statues design. This is mainly based on customer needs. When designing, we must consider its environment and the theme ideas that need to be expressed, so as to determine the form, color, etc. of the Stone Garden Statues and design a complete plan.
2. Small clay drafts of Stone Garden Statues. The role of the clay draft is to provide customers with confirmation of the effect and lay the foundation for the finished stone garden sculpture. Only by being meticulous enough in this link can customers be reassured.
3. The main skeleton of the Stone Garden Statues. The main frame is made according to the proportion of the clay draft to the required height. The inner frame is welded with Stone Garden Statues tubes and Stone Garden Statues flat steel. All load-bearing frames are fully welded on both sides. After the entire frame is completed, it is fully coated with anti-rust paint. Three times.
4. Stone Garden Statues forging and shaping. Which type of stone garden sculpture board to use depends on the cost requirements and customer needs.
5. Polish and spray paint the Stone Garden Statues. The surface of the Stone Garden Statues after welding is relatively rough and needs to be polished. Use a grinding wheel to smooth the welds and excess areas of the Stone Garden Statues. This requires a lot of labor to complete, and finally spray paint according to needs.
6. Transportation and installation of Stone Garden Statues. It is generally welded and relatively strong, that is, the skeleton of the
stone sculpture itself is welded to the embedded iron on the base, and the steel bars are welded under the embedded iron. The length of the steel bar and the size of the embedded iron are determined according to the size of the stone sculpture.
