stone mountain carving is generally divided into two types: manual carving and CNC carving.
Manual carving: refers to the traditional carving method, the finished product is made by hand, the disadvantage of this method is slow speed and high cost. The advantage is that the more people look at it, the more they want to see it, and it has a unique aesthetic feeling and is vivid.
The sculpture industry is an inseparable part of us, and it can be seen everywhere in some ancient buildings. Every time we see the works presented, we are amazed by them. Whether it is on hard stones, wood, or even gold, silver and jade, etc., various patterns can be carved. The following editor will tell you about the relevant knowledge of stone mountain carving.
Precautions for stone mountain carving:
1. During use, when stone materials fall into the initial mold, the fat material will not be able to accurately enter the initial mold, resulting in excessive friction on the mold wall and forming cracks, and then forming wrinkles in the stone mountain carving. Therefore, it is necessary to avoid stone mountain debris falling into the mold during use.
2. Boshi mountain carving and molding raw materials are poor, the density is not high, and the oxidation is too fast after high temperature, which will form fine pits on the surface of the mold. After forming, the surface of the stone mountain is not bright, which affects the appearance.
3. The dropping speed of the machine is not uniform, and the improper adjustment of the tuyere will cause the initial mold and mold temperature of the glass bottle to be uncoordinated, and cold spots will be made in the stone mountain carving, which will affect the brightness.
4. The poor quality of Shishan carving oil will make the mold not smooth, and the dropping speed of the equipment will decrease, which will affect the final effect of production.
CNC engraving: It is produced by using a stone mountain engraving machine. The advantage is that the production speed is fast, and mass production can be carried out with only one drawing or one model, which cannot be realized by manual carving. It is generally used to make a large number of
stone carving crafts, architectural stone carving components, and marble reliefs.
To sum up, do you know the technique of stone mountain carving?
